Welcome to Sichuan Yuncheng Vehicle Gas Equipment

Email

sales@scyuncheng.com

Whatsapp

+8618628088808

CNG Motorcycle Conversion Kit Type 02 ≤500CC | scyuncheng

2026-11-16 Visits:6

scyuncheng Workshop CNG Motorcycle Conversion Kit — Type 02 Reducer for Carbureted Engines ≤500CC

scyuncheng-cng-motorcycle-conversion-kit-parts.jpg

The scyuncheng workshop CNG motorcycle conversion kit is a packing-list set for conversion and retrofit shops that install compressed natural gas (CNG) fuel systems on carbureted gasoline motorcycles. The source document is written for conversion-plant use. This carton is a CNG kit only. The Type 02 reducer supplied in the set is specified for carburetor gasoline engines with a displacement of ≤500CC. The sections below follow that packing list: the reducer specifications, the engine condition the document names, and every part and quantity it lists.

What Is the scyuncheng Workshop CNG Motorcycle Conversion Kit?

This kit groups the fuel-system parts a workshop needs when converting a carbureted motorcycle to CNG, from the Type 02 reducer and T3-H3 filling valve through the hoses, 6 mm high-pressure steel pipe and accessory pack. The packing list also includes packaging and freight as line items, but it gives no further packing detail and no price. Each named part and quantity is listed in the kit-contents section below.

These parts belong to the motorcycle CNG/LPG conversion kits range. scyuncheng also supplies LPG motorcycle products in that category; the kit in this article is the CNG workshop set only. For a wider overview, see Can Motorcycles Be Converted to CNG or LPG? A pre-order checklist is in the 20 Must-Ask Questions Before Buying CNG/LPG Conversion Kits guide, and a complete kit listing is on the Motorcycle CNG Conversion Kit product page.

Type 02 Reducer Specifications

The figures below come only from the workshop packing list for the Type 02 reducer. Fields that the source document does not state are omitted.

ItemValue stated in the packing list
ProductType 02 reducer, quantity 1
Applicable displacement≤500CC
Engine typeCarburetor gasoline engine
First-stage output pressure0.18–2.0 MPa
Second-stage output pressure0.07–0.08 MPa
Third-stage output pressure0–100 Pa
Rated working pressure20 MPa
Maximum flow0–15 m³/h
Working temperature−40℃ to 100℃
Solenoid valve model12V DS 17W

The Type 02 unit in the product photo has a red solenoid, a silver body and brass ports. The 12V DS 17W solenoid model is specified for this reducer, not for the separate gasoline solenoid valve listed later. Matching reducer hardware is on the CNG Motorcycle Reducer product page. After installation, commissioning is a separate job; see the article on motorcycle CNG/LPG reducer tuning.

Which Motorcycles Can Use This Kit?

The packing list limits this kit to carburetor gasoline engines with a displacement of ≤500CC. It does not name motorcycle brands, model codes or cylinder counts, and it does not describe fuel-injected engines, so those details are not added here. Confirm that the motorcycle is a carbureted gasoline engine at or under 500CC before treating this carton as the matching set.

What Parts Come in the Kit?

The packing list names the following items and quantities. Each part is shown with its product photo. Components not named in the source document, including a CNG cylinder, are omitted from this list.

Type 02 reducer × 1

scyuncheng-type-02-cng-motorcycle-reducer.jpg

This is the three-stage CNG motorcycle pressure reducer described in the specification table, supplied with the 12V DS 17W solenoid named for that reducer.

T3-H3 filling valve × 1

scyuncheng-t3-h3-cng-motorcycle-filling-valve.jpg

The source names this port only as T3-H3. The product photo shows the filling valve with a red dust cap. The document does not give another standard name for this valve.

Type 722 fuel changeover switch × 1 set

scyuncheng-type-722-cng-fuel-changeover-switch.jpg

The photo shows the Type 722 CNG/gasoline changeover switch with a wiring harness and a fuel-level window. The packing list does not describe the switch positions or a switching procedure.

Mixer × 1 and carburetor rubber sleeve × 1

scyuncheng-cng-motorcycle-mixer.jpg

The photo shows an aluminum mixer (venturi) with a side hose barb. A carburetor rubber sleeve is listed with the mixer.

CB08 pressure sensor × 1

scyuncheng-cb08-cng-pressure-sensor.jpg

The document names this part as a CB08 pressure sensor. The photo is a CB08 analog pressure gauge with an electrical connector; the gauge face shows kg/cm² and psi. The packing list does not state a pressure range for this sensor, so no range is added here.

Gasoline solenoid valve × 1

scyuncheng-motorcycle-gasoline-solenoid-valve.jpg

The photo shows a petrol shut-off valve with a blue coil and OFF/ON marked on the brass body. The packing list does not give a voltage or model number for this gasoline valve.

Hoses and gaskets, 1 set

scyuncheng-cng-motorcycle-hoses-and-gaskets.jpg

The set contains: outlet hose 1000 mm × 1; vacuum hose 1000 mm × 1; coolant circulation hose 1000 mm × 1; gaskets 740 mm × 2; and a mixer connection rubber sleeve.

High-pressure steel pipe

scyuncheng-cng-motorcycle-high-pressure-steel-pipe.jpg

The list specifies 6 mm steel pipe in two lengths: 2600 mm × 1 and 600 mm × 1. The photo shows coiled white-coated steel tubing.

Accessory pack

scyuncheng-cng-motorcycle-kit-accessory-pack.jpg

The accessory pack contains: water tees × 2; clamps 38-57 × 2; clamps 13-19 × 6; clamps 10-16 × 2; M13 spring clips × 2; double-cone ferrule cap × 1; double-cone ferrules × 2; single-face ferrule cap × 1; single-face ferrules × 2; pipe clips × 3; and self-tapping screws × 3.

Packaging and freight are listed, with no further detail. A total line is present, but the document does not give a price.

What Does the Packing List Leave Out?

Workshops often ask whether a “complete” motorcycle CNG kit already includes the gas cylinder and the brackets needed to mount it. This packing list does not include a CNG cylinder, a cylinder valve or cylinder mounting brackets; those items have to be confirmed separately. It also does not name extra tools or a commissioning procedure.

Certification

The source packing list for this workshop CNG motorcycle kit does not list certificate names, numbers or approval marks. Buyers who need factory or product documents can review the files published on the scyuncheng certification page and confirm what applies in their market before installation or sale.

Frequently Asked Questions

The three questions below come from common workshop and rider discussions. The answers stay with the packing list.

What should a complete workshop CNG motorcycle kit include, and can I just buy loose parts?

Forum and buying-guide discussions often warn shops not to assume that a “kit” and a pile of loose parts are the same thing. This scyuncheng carton is a documented workshop set: the Type 02 reducer, filling valve, changeover switch, mixer, pressure sensor, gasoline solenoid valve, hoses and gaskets, two lengths of 6 mm high-pressure steel pipe, and a counted accessory pack. Buying those items individually can leave out a sleeve, a ferrule cap or a hose length the packing list already specifies. The same list does not include a CNG cylinder or cylinder brackets, so those still have to be sourced and confirmed separately.

Will this kit fit a carbureted motorcycle at or under 500CC?

The Type 02 reducer is specified for carburetor gasoline engines with a displacement of ≤500CC. If the motorcycle uses a carburetor and its displacement is at or under that limit, it matches the only engine condition the packing list gives. The document does not name motorcycle models and does not describe fuel-injected engines, so this article does not extend the kit to those cases.

Will the motorcycle lose power on CNG, and how do the gasoline solenoid and changeover switch work?

Riders and workshops often report that a motorcycle feels weaker after it is converted to CNG, especially in daily riding. This packing list does not state a power-loss figure, so no percentage is given here. The kit keeps the petrol system in use: it includes a Type 722 fuel changeover switch and a gasoline solenoid shut-off valve, so the motorcycle can be switched between gasoline and CNG. The source document does not describe the switch positions or the step-by-step changeover method.


Related CNG/LPG Resources

Explore related CNG/LPG product categories, technical guidance and project-support resources for vehicle conversion applications.

Leave Your Message

For a faster response, contact us directly via WhatsApp or WeChat:

WhatsApp QR Code

WhatsApp

WeChat QR Code

WeChat

Leave a message

For a faster response, contact us directly via WhatsApp or WeChat:

WhatsApp QR Code

WhatsApp

WeChat QR Code

WeChat